Tag Archives: build
When it comes to maximizing space in the home you need to think creatively and search for additional ways to create space that doesn’t appear to be there. One of the best ways of doing this is to utilize the corners of rooms and also the height of the room, very often people place small items in the corner which looses all of the space that the corner has to offer. On of my favorite ways to make use of this space is to make a bookshelf to sit in the corner of the room, when done right it doesn’t look it uses any space at all and actually becomes a part of the room as opposed to an object inside it. If you fancy installing a corner bookshelf then don’t panic about paying big bucks from a furniture store, simply follow this simple guide to help you make and install your own.
To create your bookshelf you first need to decide how large it is going to be, make sure that this is proportional to the size of the room, the bookshelf should take up about a third of each wall for it to look the best. The bookshelf looks best if it goes right the way up to the ceiling, leave a gap of around 5 inches from the ceiling when measuring. Once you have measured for the outer frame, you can measure for the shelves that you want, the amount is entirely up to you but you should aim for the distance between each shelf to be the same for the best results.
Once you’ve measured for your bookshelf it is time to get the equipment, for the cheapest but best wood, you should be looking to buy MDF, it is very flexible and has great value. Most DIY stores will cut the wood to size if you give them the measurements, this will save you money on buying or renting equipment like saws. Other equipment that you will need are;
- Nail gun
- Sanding block
- Spirit level
To start off the build you should place lengths of wood on each wall at both the top of where you frame will go, and the bottom, this is how you will attach the bookshelf to the wall. Next you should nail the outer frame to the lengths of wood that are on the wall, use your spirit level to ensure they are straight. Once you have the outer frame completed, you should start getting the shelves ready, the easiest way of placing the shelves is to put small lengths of wood, the same length as the shelves, below where each shelf will go, use a pencil to measure the distances. Once you have this in place you can start placing the shelves on the wooden slats, you don’t need to nail the shelves down, they will be fine just sitting on the slats. One of the sides should have longer shelves than the other, this will ensure that the corner has full coverage, if your shelves are too snug or don’t fit properly then simply use a sanding block to trim them down a touch.
If you wish to paint the bookshelf then do this before starting and allow plenty of time to dry, the same goes for adding any designs on the sides. Once your bookshelf is ready then you can start adding the books or items that you wish to put on your shelves. Remember that if the shelves are empty then you will lose the effect so if you don’t have sufficient books then place ornaments or photos on the shelves to fill them up.